A Comparative Study on the Effect of Fineness of Low-Grade Calcined Clays on Engineering Properties of Binary and Ternary Blended Concretes

Document Type : Research Papers

Authors

1 Assistant Professor, Department of Civil and Environmental Engineering, Amirkabir University of Technology, Tehran, Iran.

2 M.Sc. Student, Department of Civil and Environmental Engineering, Amirkabir University of Technology, Tehran, Iran.

3 Ph.D. Candidate, Department of Civil and Environmental Engineering, Amirkabir University of Technology, Tehran, Iran.

4 Associate Professor, School of Civil Engineering, College of Engineering, University of Tehran, Tehran, Iran.

5 Professor, Department of Civil and Environmental Engineering, Amirkabir University of Technology, Tehran, Iran.

Abstract

The fineness of low-grade Calcined Clay (CC) particles in limestone calcined clay cement (LC3) and calcined clay cement (C3) plays an important role in terms of grinding time and energy consumption. In this regard, two low-grade kaolinitic clays (kaolinite content of less than 40%) from domestic sources were firstly calcined and then ground using a laboratory ball mill to achieve three fineness values of ~ 8 ± 2, 20 ± 2, and 32 ± 2 wt% retaining on a 45 μm sieve. According to experimental results, the substitution of finer low-grade CCs in binary C3 and ternary LC3 concretes had a marginal improvement in the compressive strength, bulk water absorption, and electrical resistivity by 4.7, 5.2, and 14.5%, respectively, compared to their counterpart coarser low-grade CCs mixtures. However, the chloride ions migration coefficients of mixtures containing low-grade CCs with the lowest fineness were 81-107% and 100-134% of their counterpart mixtures with the highest fineness of CC particles at 28 and 91 days, respectively. Overall, the low-grade CCs with a fineness of ~32 ± 2 wt% retaining on a 45 μm sieve using less grinding time and energy consumption delivered a satisfactory mechanical and durability performance against chloride attack.

Keywords

References

Afzali-Naniz, O., Mazloom, M. and Karamloo, M. (2021). “Effect of nano and micro SiO2 on brittleness and fracture parameters of self-compacting lightweight concrete”, Construction and Building Materials, 299(13), 124354, https://doi.org/10.1016/j.conbuildmat.2021.124354.
Andrés, L.M., Antoni, M.G., Alujas Diaz, A., Martirena Hernandez, J.F. and Scrivener, K.L. (2015). “Effect of fineness in clinker-calcined clays-limestone cements”, Advances in Cement Research, 27(9), 546-556, https://doi.org/10.1680/jadcr.14.00095.
Antoni et al. (2012). “Cement substitution by a combination of metakaolin and limestone”, Cement and Concrete Research, 42(12), 1579-1589, https://doi.org/10.1016/j.cemconres.2012.09.006.
ASTM C150/C150M-20. (2020). “Standard Specification for portland cement”, ASTM International, West Conshohocken, PA, https://www.astm.org/c0150_c0150m-20.html.
ASTM C1585-20. (2020). “Standard test method for measurement of rate of absorption of water by hydraulic-cement concretes”, ASTM International, West Conshohocken, PA, https://www.astm.org/c1585-20.html.
ASTM C1760-12. (2021). “Standard test method for bulk electrical conductivity of hardened concrete”, ASTM International, West Conshohocken, PA, https://www.astm.org/c1760-12.html.
ASTM C39/C39M-21. (2021). “Standard test method for compressive strength of cylindrical concrete specimens”, ASTM International, West Conshohocken, PA, https://www.astm.org/c0039_c0039m-20.html.
ASTM C494/C494M-17. (2020). “Standard specification for chemical admixtures for concrete”, ASTM International, West Conshohocken, PA, https://www.astm.org/c0494c0494m-17.html.
Avet, F. and Scrivener, K. (2018). “Investigation of the calcined kaolinite content on the hydration of limestone calcined clay cement (lc3)”, Cement and Concrete Research, 107, 124-135, https://doi.org/10.1016/j.cemconres.2018.02.016.
Ayati, B., Newport, D., Wong, H. and Cheeseman, C. (2022). “Low-carbon cements: potential for low-grade calcined clays to form supplementary cementitious materials”, Cleaner Materials, 5, 100099, https://doi.org/10.1016/j.clema.2022.100099.
Bahman-Zadeh, F., Ramezanianpour, A.A. and Zolfagharnasab, A. (2022). “Effect of carbonation on chloride binding capacity of limestone calcined clay cement (lc3) and binary pastes”, Journal of Building Engineering, 52, 104447, https://doi.org/10.1016/j.jobe.2022.104447.
Bahman-Zadeh, F., Zolfagharnasab, A., Pourebrahimi, M., Mirabrishami, M. and Ramezanianpour, A.A. (2023). “Thermodynamic and experimental study on chloride binding of limestone containing concrete in sulfate-chloride solution”, Journal of Building Engineering, 66, 105940, https://doi.org/10.1016/j.jobe.2023.105940.
Barata, M.S. and Angélica, R.S. (2011). “Pozzolanic activity of kaolin wastes from kaolin mining industry from the amazon region”, Matéria (Rio de Janeiro), 16, 797-810, https://doi.org/10.1590/S1517-70762011000300007.
Bishnoi, S., Maity, S., Kumar, M., Saxena, S.K. and Wali, S.K. (2018). “Pilot scale production of limestone calcined clay cement”, Calcined Clays for Sustainable Concrete: Proceedings of the 2nd International Conference on Calcined Clays for Sustainable Concrete, 69-74, https://doi.org/10.1007/978-94-024-1207-912.
BS 1881-122. (2020). “Testing concrete method for determination of water absorption”, https://standardsdevelopment.bsigroup.com/projects/2020-01169.
Díaz, Y.C., Berriel, S.S., Heierli, U., Favier, A.R., Machado, I.R.S., Scrivener, K.L., Hernández, J.F.M. and Habert, G. (2017). “Limestone calcined clay cement as a low-carbon solution to meet expanding cement demand in emerging economies”, Development Engineering, 2, 82-91, https://doi.org/10.1016/j.deveng.2017.06.001.
Du, H. and Dai Pang, S. (2020). “High-performance concrete incorporating calcined kaolin clay and limestone as cement substitute”, Construction and Building Materials, 264, 120152, https://doi.org/10.1016/j.conbuildmat.2020.120152.
Dumani, N. and Mapiravana, J. (2020). “Evaluation of age strengths of metakaolin blend pastes with varying fineness of grind”, Calcined Clays for Sustainable Concrete: Proceedings of the 3rd International Conference on Calcined Clays for Sustainable Concrete, 339-348, https://doi.org/10.1007/978-981-15-2806-440.
Fernandez, R., Martirena, F. and Scrivener, K.L. (2011). “The origin of the pozzolanic activity of calcined clay minerals: a comparison between kaolinite, illite and montmorillonite”, Cement and Concrete Research, 41(1), 113-122, https://doi.org/10.1016/j.cemconres.2010.09.013.
Ferreiro, S., Canut, M.M.C., Lund, J. and Herfort, D. (2019). “Influence of fineness of raw clay and calcination temperature on the performance of calcined clay-limestone blended cements”, Applied Clay Science, 169, 81-90, https://doi.org/10.1016/j.clay.2018.12.021.
Ferreiro, S., Herfort, D. and Damtoft, J.S. (2017). “Effect of raw clay type, fineness, water-to-cement ratio and fly ash addition on workability and strength performance of calcined clay - Limestone Portland cements”, Cement and Concrete Research, 101, 1-12, https://doi.org/10.1016/j.cemconres.2017.08.003.
Gettu, R., Patel, A., Rathi, V., Prakasan, S., Basavaraj, A.S., Palaniappan, S. and Maity, S. (2019). “Influence of supplementary cementitious materials on the sustainability parameters of cements and concretes in the Indian context”, Materials and Structures, 52, 1-11, https://doi.org/10.1617/s11527-019-1321-5.
Kashi, A., Ramezanianpour, A.A. and Moodi, F. (2017). “Durability evaluation of retrofitted corroded reinforced concrete columns with FRP sheets in marine environmental conditions”, Construction and Building Materials, 151, 520-533, https://doi.org/10.1016/j.conbuildmat.2017.06.137.
Kluge, W. and Assmann, B.O. (2018). “Grinding of calcined clays and its effects on cement properties”, Calcined Clays for Sustainable Concrete: Proceedings of the 2nd International Conference on Calcined Clays for Sustainable Concrete, 244-248, https://doi.org/10.1007/978-94-024-1207-939.
Krishnan, S., Emmanuel, A.C., Shah, V., Parashar, A., Mishra, G., Maity, S. and Bishnoi, S. (2018). “Industrial production of limestone calcined clay cement: experience and insights”, Green Materials, 7(1), 15-27, https://doi.org/10.1680/jgrma.18.00003.
Krishnan, S., Gopala Rao, D. and Bishnoi, S. (2020). “Why low-grade calcined clays are the ideal for the production of limestone calcined clay cement (lc3)”, Calcined Clays for Sustainable Concrete: Proceedings of the 3rd International Conference on Calcined Clays for Sustainable Concrete, 125-130, https://doi.org/10.1007/978-981-15-2806-414.
Lapeyre, J., Ma, H. and Kumar, A. (2019). “Effect of particle size distribution of metakaolin on hydration kinetics of tricalcium silicate”, Journal of the American Ceramic Society, 102(10), 5976-5988, https://doi.org/10.1111/jace.16467.
Li, R., Lei, L. and Plank, J. (2022). “Impact of metakaolin content and fineness on the behavior of calcined clay blended cements admixed with hpeg pce superplasticizer”, Cement and Concrete Composites, 133, 104654, https://doi.org/10.1016/j.cemconcomp.2022.104654.
Luzu, B., Trauchessec, R. and Lecomte, A. (2022). “Packing density of limestone calcined clay binder”, Powder Technology, 408, 117702, https://doi.org/10.1016/j.powtec.2022.117702.
Malacarne, C.S., Longhi, M.A., Silva, M.R.C., Gonçalves, J.P., Rodríguez, E.D. and Kirchheim, A.P. (2021). “Influence of low-grade materials as clinker substitute on the rheological behavior, hydration and mechanical performance of ternary cements”, Case Studies in Construction Materials, 15, e00776, https://doi.org/10.1016/j.cscm.2021.e00776.
Maraghechi, H., Avet, F., Wong, H., Kamyab, H. and Scrivener, K. (2018). “Performance of limestone calcined clay cement (lc 3) with various kaolinite contents with respect to chloride transport”, Materials and Structures, 51, 1-17, https://doi.org/10.1617/s11527-018-1255-3.
Mazloom, M., Karimpanah, H. and Karamloo, M. (2020). “Fracture behavior of monotype and hybrid fiber reinforced self-compacting concrete at different temperatures”, Advances in Concrete Construction, 9(4), 375-386, https://doi.org/10.12989/acc.2020.9.4.375.
Mazloom, M. and Salehi, H. (2018). “The relationship between fracture toughness and compressive strength of self-compacting lightweight concrete”, IOP Conference Series: Materials Science and Engineering, 431(6), 62007, https://doi.org/10.1088/1757-899X/431/6/062007.
NT Build 492. (1999). “Nord test method: chloride migration coefficients from non-steady-state”, https://www.nordtest.info/wp/1999/11/21/nt-build-492.
Pérez, A. and Martirena-Hernandez, J.F. (2020). “Influence of limestone content and psd of components on properties of clinker-calcined clay-limestone cements produced by intergrading”, Proceedings of the International Conference of Sustainable Production and Use of Cement and Concrete: ICSPCC 2019, 31-37, https://doi.org/10.1007/978-3-030-22034-14.
Pillai, R.G., Gettu, R., Santhanam, M., Rengaraju, S., Dhandapani, Y., Rathnarajan, S. and Basavaraj, A.S. (2019). “Service life and life cycle assessment of reinforced concrete systems with limestone calcined clay cement (lc3)”, Cement and Concrete Research, 118, 111-119, https://doi.org/10.1016/j.cemconres.2018.11.019.
Poon, C.S., Lam, L., Kou, S.C., Wong, Y.L. and Wong, R. (2001). “Rate of pozzolanic reaction of metakaolin in high-performance cement pastes”, Cement and Concrete Research, 31(9), 1301-1306, https://doi.org/10.1016/S0008-8846(01)00581-6.
Snellings, R., Chwast, J., Cizer, ¨O., De Belie, N., Dhandapani, Y., Durdzinski, P., Elsen, J. Haufe, J., Hooton, D., Patapy, C. and Santhanam, M. (2018). “Rilem tc-238 scm recommendation on hydration stoppage by solvent exchange for the study of hydrate assemblages”, Materials and Structures, 51(6), 1-4, https://doi.org/10.1617/s11527-018-1298-5.
Ramezanianpour, A.A., Pilvar, A., Mahdikhani, M. and Moodi, F. (2011). “Practical evaluation of relationship between concrete resistivity, water penetration, rapid chloride penetration and compressive strength”, Construction and Building Materials, 25(5), 2472-2479, https://doi.org/10.1016/j.conbuildmat.2010.11.069.
Riahi Dehkordi, E. and GivKashi, M.R. (2024). “Considerations for the construction, implementation and economic evaluation of geopolymer permanent formworks (gpfs): a new approach to protect concrete structures against aggressive environmental factors”, Arabian Journal for Science and Engineering, 49(4), 4861-4875, https://doi.org/10.1007/s13369-023-08081-4.
Richardson, M.G. (2002). “Fundamentals of durable reinforced concrete”, http://doi.org/10.1201/9781003261414.
‏Scrivener, K., Martirena, F., Bishnoi, S. and Maity, S. (2018a). “Calcined clay limestone cements (lc3)”, Cement and Concrete Research, 114, 49-56, https://doi.org/10.1016/j.cemconres.2017.08.017.
Scrivener, K., Snellings, R. and Lothenbach, B. (2018b). “A practical guide to microstructural analysis of cementitious materials”, Crc Press, https://api.taylorfrancis.com‏.
Sharma, M., Bishnoi, S., Martirena, F. and Scrivener, K. (2021). “Limestone calcined clay cement and concrete: A state-of-the-art review”, Cement and Concrete Research, 149, 106564, https://doi.org/10.1016/j.cemconres.2021.106564.
Siline, M. and Mehsas, B. (2022). “Effect of increasing the Blaine fineness of metakaolin on its chemical reactivity”, Journal of Building Engineering, 56, 104778, https://doi.org/10.1016/j.jobe.2022.104778.
Yadak Yaraghi, A.H.Y., Ramezanianpour, A.M., Ramezanianpour, A.A., Bahman-Zadeh, F. and Zolfagharnasab, A. (2022). “Evaluation of test procedures for durability and permeability assessment of concretes containing calcined clay”, Journal of Building Engineering, 58, 105016, https://doi.org/10.1016/j.jobe.2022.105016.
Zolfagharnasab, A., Ramezanianpour, A.A. and Bahman-Zadeh, F. (2021). “Investigating the potential of low-grade calcined clays to produce durable lc3 binders against chloride ions attack”, Construction and Building Materials, 303, 124541, https://doi.org/10.1016/j.conbuildmat.2021.124541.
Zunino, F. and Scrivener, K. (2020). “Increasing the kaolinite content of raw clays using particle classification techniques for use as supplementary cementitious materials”, Construction and Building Materials, 244, 118335, https://doi.org/10.1016/j.conbuildmat.2020.118335.
Civil Engineering Infrastructures Journal
Volume 58, Issue 2
December 2025
Pages 231-252

Files

History

  • Receive Date: 04 March 2023
  • Revise Date: 17 April 2024
  • Accept Date: 24 April 2024

Share

How to cite

Statistics