Optimal Control via Integrating the Dynamics of Magnetorheological Dampers and Structures

Document Type : Research Papers

Authors

1 M.Sc, Department of Structural Engineering, Faculty of Civil and Environmental Engineering, Tarbiat Modares University, Iran

2 Associate Professor, Department of Structural Engineering, Faculty of Civil and Environmental Engineering, Tarbiat Modares University, Iran.

Abstract

Magnetorheological (MR) dampers have the advantage of being tuned by low voltages. This has attracted many researchers to develop semi-active control of structures in theory and practice. Most of the control strategies first obtain the desired forces of dampers without taking their dynamics into consideration and then determine the input voltages according to those forces. As a result, these strategies may face situations where the desired forces cannot be produced by the dampers. In this article, by integrating the equations of the dynamics of MR dampers and the structural motion, and solving them in one set, a more concise semi-active optimal control strategy is presented, so as to bypass the aforementioned drawback. Next, a strong database that can be utilized to form a controller for more realistic implementations is produced. As an illustrative example, the optimal voltages of the dampers of a six-storey shear building are obtained under the scaled El-Centro earthquake and used to train a set of integrated analysis-adaptive neuro-fuzzy inference systems (ANFISs) as a controller. Results show that the overall performance of the proposed strategy is higher than most of the other conventional methods.

Keywords

Main Subjects


Bani-Hani, Kh., Ghaboussi, J. and Schneider, S.P. (1999a). “Experimental study of identification and control of structures using neural network - part1: Identification”, Journal of Earthquake Engineering and Structural Dynamics, 28(9), 995-1018.
Bani-Hani, Kh., Ghaboussi, J. and Schneider, S.P. (1999b). “Experimental study of identification and control of structures using neural network –part 2: Control”, Journal of Earthquake Engineering and Structural Dynamics, 28(9), 1019-1039.
Casciati, F., Faravelli, L. and Yao, T. (1996). “Control of nonlinear structures using the fuzzy control approach”, Journal of Nonlinear Dynamics, 11(2), 171-187.
Chase, J.G., Barroso, L.R. and Hunt, S. (2004). “The impact of total acceleration control for semi-active earthquake hazard mitigation”, Journal of Engineering Structures, 26(2), 201-209.
Clough, R.W. and Penzin, J. (2003). Dynamics of structures, 3rd ed., Computers & Structures Inc., Berkeley.
Das, D., Datta, T.K. and Madan, A. (2011). “Semiactive fuzzy control of the seismic response of building frames with MR dampers”, Journal of Earthquake Engineering and Structural Dynamics, 41(1), 99-118.
Dyke, S.J., Spencer, B.F., Sain, M.K. and Carlson, J.D. (1996). “Modeling and control of magneto-rheological dampers for seismic response reduction”, Journal of Smart Materials and Structures, 5(5), 565-575.
Dyke, S.J. and Spencer, Jr. B.F. (1997). “A comparison of semi-active control strategies for the MR damper”, Proceedings of Intelligent Information Systems, Grand Bahama Island.
Faruque, A. and Ramaswamy, A. (2009). “Optimal fuzzy logic control for MDOF structural systems using evolutionary algorithms”, Journal of Engineering Applications of Artificial Intelligence, 22(3), 407-419.
Ghaffarzadeh, H. (2013). “Semi-active structural fuzzy control with MR dampers subjected to near-fault ground motions having forward directivity and fling step”, Journal of Smart Structures and Systems, 12(6), 595-617.
Jansen, L.M. and Dyke, S.J. (2000). “Semi-active control strategies for MR dampers: Comparative study”, Journal of Engineering Mechanics, 126(8), 795-803.
Kim, H.S. (2014). “Multi-input multi-output semi-active fuzzy control os seismic-excited building with evolutionary optimization algorithms”, International Journal of Control and Automation, 7(6), 143-152.
Kirk, D.E. (1970). Optimal control theory: An introduction, Prentice Hall Inc., New York.
K-Karamodin, A. and H-Kazemi, H. (2010). “Semi-active control of structures using neuro predictive algorithm for MR dampers”, Journal of Structural Control and Health Monitoring, 17(3), 237-253.
Liem, D.T., Truong, D.Q., Ahn, K.K. (2015). “Hysteresis modeling of magneto-rheological damper using self-tuning Lyapunov-based fuzzy approach”, International Journal of Precision Engineering and Manufacturing, 16(1), 31-41.
Ohtori, Y., Christenson, R.E. and Spencer, B.F. (2004). “Benchmark control problems for seismically excited nonlinear buildings”, ASCE Journal of Engineering Mechanics, 130(4), 366-385.
Schurter, K.C. and Roschke, P.N. (2001). “Neuro-fuzzy control of structures using acceleration feedback”, Journal of Smart Materials and Structures, 10(4), 770-779.
Shirazi, F.A., Mohammadpour, J., Grigoriadis, K.M. and Gangbing, S. (2012). “Identification and control of an MR damper with stiction effect and its application in structural vibration mitigation”, Journal of IEEE: Transactions on Control Systems Technology, 20(5), 1285-1301.
Xu, Y.L., Qu, W.L. and Ko, J.M. (2000). “Seismic response control of frame structures using magneto-rheological / electro-rheological dampers”, Journal of Earthquake Engineering and Structural Dynamics, 29(5), 557-575.
Xu, Z.D. and Guo, Y.Q. (2008). “Neuro-fuzzy control strategy for earthquake-excited nonlinear magnetorheological structures”, Journal of Soil Dynamics and Earthquake Engineering, 28(9), 717-727.
Yan, G. and Zhou, L.L. (2006). “Integrated fuzzy logic and genetic algorithms for multi-objective control of structures using MR dampers”, Journal of Sound and Vibration, 296(1-2), 368-382.
Yao, J., Xia, X., Miao, Y., Ma, C. (2013). “Semi-active control system for magnetorheological damper based on identification model with fuzzy neural network”, Journal of Vibroengineering, 15(4), 2012-2021.
Zhang, J. and Roschke, P.N. (1999). “Active control of a tall structure excited by wind”, Journal of Wind Engineering and Industrial Aerodynamics, 83(1-3), 209-223.