Civil Engineering Infrastructures Journal

Civil Engineering Infrastructures Journal

Mechanical and Durability Performance of Cassava Peel Ash–Blended Concrete with Epoxy Surface Coating

Authors
Department of Civil Engineering, Tshwane University of Technology, Pretoria 0183, South Africa
Abstract
Cassava peel ash (CPA), an agricultural waste by-product, was evaluated as a partial replacement for Portland Limestone Cement (PLC), Dangote CEM II 32.5R in concrete, with emphasis on improving durability through epoxy surface coating. CPA was produced under controlled combustion and characterized using XRF, XRD, and SEM, confirming its silica-rich (≈80 wt.% SiO₂), low-calcium, and predominantly amorphous pozzolanic nature. Concrete mixtures containing 0–20% CPA were assessed for mechanical and durability performance using both uncoated and epoxy-coated specimens. Results showed that increasing CPA content reduced early-age strength; however, 10% CPA achieved compressive strength comparable to the control (15.20 MPa vs. 15.46 MPa at 28 days). Epoxy surface coating significantly enhanced performance, increasing the 28-day compressive strength of CPA10 by approximately 24% (to 19.10 MPa) and improving flexural strength by over 15%. Durability was markedly improved by epoxy coating, with water absorption reduced to ~0.17%, chemical-induced strength loss reduced by more than 40%, and carbonation depth reduced by over 50% compared with uncoated specimens. The study demonstrates that combining 10% CPA replacement with epoxy surface coating provides a practical and durable low-carbon concrete system suitable for aggressive service environments, particularly where enhanced resistance to moisture ingress, chemical attack, and carbonation is required.
Keywords
Subjects


Articles in Press, Accepted Manuscript
Available Online from 18 November 2026

  • Receive Date 28 January 2026
  • Revise Date 13 October 2026
  • Accept Date 18 November 2026