Civil Engineering Infrastructures Journal

Civil Engineering Infrastructures Journal

Post-Fire Performance of Steel-Fiber, MIBA-Blended Concrete Enhanced by Inorganic Self-Healing

Authors
1 Department of Civil Engineering, International Islamic University, Islamabad
2 Department of Civil Engineering, International Islamic University, Islamabad, Pakistan.
3 Department of Civil Engineering, International Islamic University Islamabad
4 Department of Civil Engineering, University of Engineering & Technology, Peshawar
Abstract
This study examines the post-fire performance and inorganic self-healing of concretes incorporating municipal solid-waste incineration bottom ash (MIBA) and steel fibers. The combined effects of MIBA dosage and fibers used with inorganic healing granules on damage and recovery after heating are insufficiently resolved. The objective was to quantify how MIBA (0, 5, 10, 15% cement replacement) and steel fibers (0, 0.5, 1.0%) influence compressive strength and ultrasonic pulse velocity (UPV) at ambient, after 400 °C exposure, and after re-curing, and to identify workable MIBA levels and fiber benefits. A 4×3 factorial experimental program consists of casting concrete cubes with 2% (by mass of concrete) epoxy-coated inorganic healing granules. The samples were tested in three states, control, heated, and 28-day water re-cured. Increasing MIBA lowered baseline strength (15%) and reduced residual and healed ratios, with the sharpest penalties at 15%. Fibers had limited effect on peak ambient strength but improved post-fire recovery, raising residual ratios and healed ratios, with the largest proportional gains at higher MIBA. Overall, up to 10% MIBA offers manageable trade-offs, while pairing fibers with inorganic granules enables robust post-fire strength and stiffness recovery after heat exposure.
Keywords
Subjects


Articles in Press, Accepted Manuscript
Available Online from 18 November 2026

  • Receive Date 07 November 2025
  • Revise Date 31 August 2026
  • Accept Date 18 November 2026