Threat-Independent Column Removal and Fire-Induced Progressive Collapse: Numerical Study and Comparison

Document Type : Research Papers

Authors

1 Assistant Professor, Department of Earthquake Engineering, Babol University of Technology, Babol, Iran

2 M.Sc. of Structural Engineering, Department of Structural Engineering, Islamic Azad University, Takestan Branch, Iran

Abstract

Progressive collapse is defined as the spread of an initial failure from element to element, eventually resulting in the collapse of an entire structure or a disproportionately large part of it. The current progressive collapse analyses and design methods in guidelines and codes focus on the alternate load path method. This method is suitable especially in the case of blast-induced progressive collapse. In this paper, fire-induced and threat-independent progressive collapse potential is numerically investigated in steel moment resisting frames. Affecting parameters such as location of initial failure and number of floors are considered in this study. Two different mechanisms were observed in threat-independent and fire-induced progressive collapse: while in threat-independent column removal alternative load paths play major role, in fire-induced progressive collapse the weight of the structure above the failure region is the most important parameter.

Keywords

Main Subjects


Agarwal, A. and Varma, A.H. (2014). “Fire induced progressive collapse of steel building structures: The role of interior gravity columns”, Engineering Structures, 58, 129-140.
Almusallam, T.H., Elsanadedy, H.M., Abbas, H., Alsayed, S.H. and Al-Salloum, Y.A. (2010). “Progressive collapse analysis of a RC building subjected to blast loads”, Structural Engineering and Mechanics, 36(3), 301-319.
ASCE 7-05, (2005). Minimum design loads for buildings and other structures, American Society of Civil Engineers, New York, USA.
Astaneh-Asl, A. (2003). “Progressive collapse prevention in new and existing buildings”, Proceedings of 9th Arab Structural Engineering Conference, Abu Dhabi, UAE, Nov. 29-Dec. 1.
Bae, SW., LaBoube, R.A., Belarbi, A. and Ayoub, A. (2008). “Progressive collapse of cold-formed steel framed structures”, Thin-Walled Structures, 46(7), 706-19.
Blagojević, M.D. and Pešić, D.J. (2011). “A new curve for temperature-time relationship in compartment fire”, Thermal Science, 15(2), 339-352.
Eurocode, de Normalisation, C.E. (2005). Eurocode 3: Design of steel structures. Part 1.2: General rules–Structural fire design, European Committee for Standardization, Brussels, Belgium.
FEMA 403, Corley, G. (2002). World Trade Center building performance study: data collection, preliminary observations, and recommendations, Federal Emergency Management Agency, Washington, DC, USA.
Fu, F., (2009), “Progressive collapse analysis of high-rise building with 3-D finite element modeling method”, Journal of Constructional Steel Research, 65(1), 1269-1278.
GSA, (2003). Progressive collapse analysis and design guidelines for new federal office buildings and major modernization projects, The U.S. General Services Administration, Washington, DC., USA.
Horr, A.M. and Safi, M. (2003). “Multi-layered energy absorber frames for tall buildings under high-speed impact”, Structural Design of Tall and Special Building, 12(5), 423–450.
Jiang, J., Li, G.Q., and Usmani, A. (2014). “Progressive collapse mechanisms of steel frames exposed to fire”, Advances in Structural Engineering, 17(3), 381-398.
Kim J. and Kim T. (2009a). “Assessment of progressive collapse-resisting capacity of steel moment frames”, Journal of Constructional Steel Research, 65(1), 169-179.
Kim, H., Kim, J. and An, D. (2009b), “Development of integrated system for progressive collapse analysis of buildings structures considering dynamic effects”, Advances in Engineering Software, 40(1), 1–8.
Kim, J. and Lee, Y. (2010). “Progressive collapse resisting capacity of tube-type structures”, Structural Design of Tall and Special Buildings, 19(7), 761–777.
Lange, D., Röben, Ch. and Usmani, A. (2012). “Tall building collapse mechanisms initiated by fire: Mechanisms and design methodology”, Engineering Structures, 36, 90–103.
Marjanishvili, S.M. (2004). “Progressive analysis procedure for progressive collapse”, Journal of Performance of Constructed Facilities, 18(2), 79-85.
NIST, Smilowitz R., Dusenberry, D.O., Duthinh, D., Lew, H.S. and Carino, N.J. (2007). Best practices for reducing the potential for progressive collapse in buildings, US Department of Commerce, National Institute of Standards and Technology, Gaithersburg, USA.
Nöldgen, M., Fehling, E., Riedel, W. and Thoma, K. (2012). “Vulnerability and robustness of a security skyscraper subjected to aircraft impact”, Computer-Aided Civil and Infrastructure Engineering, 27(5), 358–368.
Parsaeifard, N. and Nateghi-A, F. (2013). “The effect of local damage on energy absorption of steel frame buildings during earthquake”, International Journal of Engineering, Transactions B: Applications, 26(2), 143-152.
Qian, K. and Li, B. (2012). “Slab effects on response of reinforced concrete substructures after loss of corner column”, ACI Structural Journal, 109(6), 845-856.
Scott, D., Lane, B. and Gibbons, C. (2002). “Fire induced progressive collapse", Workshop on Prevention of Progressive Collapse, Chicago, US, Jul. 10-12.
Simulia, D.S. (2010). Abaqus analysis user manual, Dassault Systemes, Pawtucket, USA.
Song, B.I., Giriunas, K.A., and Sezen, H. (2014). “Progressive collapse testing and analysis of a steel frame building”. Journal of Constructional Steel Research, 94, 76-83.
Starossek, U. (2009). Progressive collapse of structure, Thomastelford, London, UK.
Starossek, U. (2008). “Avoiding disproportionate collapse of tall buildings”, Structural Engineering International, 18(3), 238-246.
Sun, R., Huang, Z. and Burgess, I.W. (2012a). “Progressive collapse analysis of steel structures under fire conditions”, Engineering Structures, 34, 400–413.
Sun, R., Huang, Z. and Burgess, I.W. (2012b). “The collapse behaviour of braced steel frames exposed to fire”, Journal of Constructional Steel Research, 72, 130–142.
Talaat, M. and Mosalam, K.M. (2009). “Modeling progressive collapse in reinforced concrete buildings using direct element removal”, Earthquake Engineering and Structural Dynamics, 38(5), 609–634.
Tavakoli, H. and Kiakojouri, F. (2012). “Assessment of earthquake-induced progressive collapse in steel moment frames”, Proceedings of 15th World Conference on Earthquake Engineering, Lisbon, Portugal, Sep. 24-28.
Tavakoli, H.R. and Kiakojouri, F. (2013a). “Influence of sudden column loss on dynamic response of steel moment frames under blast loading”, International Journal of Engineering, Transactions B: Applications, 26(2), 197-206.
Tavakoli, H.R. and Kiakojouri, F. (2013b). “Numerical study of progressive collapse in framed structures: A new approach for dynamic column removal”, International Journal of Engineering, Transaction A: Basics, 26(7), 685-692.
Tavakoli, H.R. and Kiakojouri, F. (2014). “Progressive collapse of framed structures: Suggestions for robustness assessment”, Scientia Iranica A, 21(2), 329-338.
Usmani, A.S., Chung, Y.C. and Torero, J.L. (2003). “How did the WTC towers collapse: A new theory”, Fire Safety Journal, 38(6), 501-33.
Zhang, X., Duan, Z. and Zhang, C. (2008). “Numerical simulation of dynamic response and collapse for steel frame structures subjected to blast load”, Transactions of Tianjin University, 14(1), 523-529.
Zhou, Q. and Yu, T. (2004). “Use of high-efficiency energy absorbing device to arrest progressive collapse of tall building”, Journal of Engineering Mechanics, 130(10), 1177–1187.